Precautions For Installation Of Electric Valves

We all know that electric valves have many advantages such as small size, convenient operation and low resistance. However, the installation requirements for this electric valve device are also very strict.

Electric valve

Because of the above, our little mistakes may cause the valve to fail to achieve a good sealing effect. What should we pay attention to during the installation process?

The first point is that when installing, pay attention to certain requirements for the sequence of opening devices. The most basic requirement is to keep the same according to the rotation angle of the valve plate. In addition, the valve flap should be installed on the position with the closed mark.

The second point is that when installing an electric valve, if some products have a bypass valve on it, you must first open the bypass valve at this time, and then you can directly open the valve device after the installation is complete.

The third point is that you must strictly follow the manufacturer's installation instructions step by step, and if there are some relatively large electric valve devices, you must also pay great attention to the choice of installation foundation. As for the installation foundation, firmness must be the first point.